Having a broken or chipped auto glass introduces yours to a diversity of risks which can range from the glass falling off to accidents on the road. As such, it is wise to have the auto glass Richmond Hill repaired as soon as possible. While this could be done immediately in a perfect world, financial constraints and time limitations might make it tough for you to repair it immediately. However, this increases the risk that thieves or rodents can make their way into your car, not to mention the looming specter of water damage. The trick lies in protecting your car from such threats. Here are three steps to follow.
Remove the Glass
Wear gloves and start removing the pieces of auto glass Richmond Hill from your car’s frame as well as in the seats. You should start with the large pieces and proceed with the smaller ones. Once you have eliminated as much glass as possible, you can then proceed to vacuum the vehicle to eliminate the smaller pieces.
Wipe Down the Window Seal
Once you are sure that no glass pieces are remaining on the window seal, wet a piece of cloth and start wiping the window seal area. Remove as much dust and dirt as you can. Since dust and dirt make tape tough to stick onto a surface, eliminating it is a necessity.
Seal the Window
Buy a clear packing tape and use it to deal with the damaged area. Place the packing tape from the inside of the car since placing it outside can lead to the peeling of the paint. Tapes are better than card boards as they prevent moisture from making its way into the vehicle. Start by placing the tape vertically on the affected area to cover all the way to the window frame. Layer more tape on the first pieces to make the covering strong.
The last thing you need is to leave your vehicle exposed to water damage and rodents. While the end goal is to have the auto glass Richmond Hill repaired, this can be a temporary solution. Consider the steps above to avoid further losses.
Remove the Glass
Wear gloves and start removing the pieces of auto glass Richmond Hill from your car’s frame as well as in the seats. You should start with the large pieces and proceed with the smaller ones. Once you have eliminated as much glass as possible, you can then proceed to vacuum the vehicle to eliminate the smaller pieces.
Wipe Down the Window Seal
Once you are sure that no glass pieces are remaining on the window seal, wet a piece of cloth and start wiping the window seal area. Remove as much dust and dirt as you can. Since dust and dirt make tape tough to stick onto a surface, eliminating it is a necessity.
Seal the Window
Buy a clear packing tape and use it to deal with the damaged area. Place the packing tape from the inside of the car since placing it outside can lead to the peeling of the paint. Tapes are better than card boards as they prevent moisture from making its way into the vehicle. Start by placing the tape vertically on the affected area to cover all the way to the window frame. Layer more tape on the first pieces to make the covering strong.
The last thing you need is to leave your vehicle exposed to water damage and rodents. While the end goal is to have the auto glass Richmond Hill repaired, this can be a temporary solution. Consider the steps above to avoid further losses.
